MPM3682GRE soldering problems

barry.darnell · March 21, 2023, 1:52pm

We are using MPM3682GRE and are having problems with the 9 testpoints (in the keepout area) shorting during reflow. We don’t have any copper in this area and we have reduced the paste openings in our stencil. Any recommendations?

MPSNow_Saurabh · September 19, 2023, 1:06am

Hi @barry.darnell,

Please follow these guidelines for soldering.

https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Article/lang/en/sku/MPM3630GQV/document_id/10121/

I hope this helps.

Thank you.
Saurabh