I am designing dc-dc power supply using this module. The parameters are below,
Vin = 7 to 36V,
Vout = 5.8V,
Iout = 1.5A,
Fsw = 350 khz,
I am designing with your online design tool but the phase margin & gain margin I am getting is very less.
How can I increase (phase margin) it without changing the frequency?
Hi Rachit,
For MPQ4323C, can you share a capture of what you are working with?
- Confirm your feedback path network values?
- Design target values section?
Regards,
Nouman