I have designed my schematic based on HR1001 (16V -10A) ,the output voltage starts with 16 v and decays to 0 at no load .
I guess that CS capacitor is mis_chosen (330 nf ) ; or the burst pin configuration
waiting for your recommendation
I guess that CS capacitor is mis_chosen (330 nf ) ; or the burst pin configuration
waiting for your recommendation
Hello Mariam-shalaby,
Please reach out to mpsnow@monolithicpower.com or MPS NOW Remote Support - Support (monolithicpower.com) for more support regarding your schematic.
Regards,
Vinh Tran